Duroflame Carré Pellet Stove

Specifications

Design and build quality

The Duroflame Carré stands out for its vertical, rectangular design — narrower and taller than a conventional pellet stove — built to fit into wall recesses or corners where a wider stove simply would not go. The anthracite/black finish shown in the product photography gives it an understated look that works with both classic and contemporary interiors. Being a vertical unit rather than a wide floor-standing stove also leaves room for furniture or shelving on either side without the appliance visually breaking up the wall.

The programmable digital control panel is one of the model's defining features: it lets you set on/off schedules, adjust output within its 4.7 to 6.1 kW range, and monitor operation without having to manage the stove by hand every day. Quiet-burn combustion reduces fan and pellet-feed noise compared with more basic stoves, a detail that matters in smaller living rooms where the stove sits close to a seating area or bedroom. For anyone comparing it with an older pellet stove, this combination of programmable control and quiet running is usually the first noticeable difference from an earlier-generation appliance.

As a distributor of this stove, Maderas Caamaño plays no part in its design or manufacture — it is a genuine Duroflame product, and the full range can be browsed on the manufacturer's official site. Our role is to make it available to customers in Spain and across Europe, backed by our experience as biomass fuel suppliers. For any purely technical question about materials or internal components, the manufacturer's own documentation remains the primary reference.

Heat output and efficiency, explained

The Duroflame Carré delivers a modulating heat output of 4.7 to 6.1 kW. That range matters because a pellet stove rarely runs flat out: the control system adjusts combustion automatically according to room temperature, sitting at a lower output most of the time and reserving the full 6.1 kW for a cold start or the coldest days of winter. This automatic modulation is also why day-to-day pellet use tends to sit closer to the lower end of the consumption range than the upper one. Buyers moving from an older, non-modulating heater in particular tend to notice this: the stove settles into a steady low hum of activity rather than cycling fully on and off.

A 95.4% efficiency rating means a very high proportion of the energy in each pellet is converted into usable heat for the home, with minimal loss up the flue. Combined with its A+ energy class, this places the Carré among the more efficient stoves in its power category. Minimum efficiency and emissions requirements for solid-fuel local space heaters of this kind are set at EU level by the Ecodesign Regulation (EU) 2015/1185, which any appliance of this type must meet to be sold within the European Union. For a buyer, that is an additional reassurance: the Duroflame Carré does not just state a given efficiency figure and energy class, it meets a verifiable, publicly available European regulatory framework.

Higher efficiency does not just cut pellet consumption for a given amount of heat delivered — it also tends to mean less ash and less burner maintenance over the course of a heating season. For any given stove, the quality of the pellet burned also affects these outcomes, which is worth keeping in mind when choosing the fuel that will feed the appliance.

Pellet hopper and autonomy

The Duroflame Carré's hopper holds 11 kg of pellets. Combined with a consumption rate of 0.53 to 1.03 kg/h depending on the power setting selected, this gives an estimated autonomy of roughly 10 to 20 hours per load — the upper figure corresponding to continuous running at the minimum power setting, the lower figure to sustained running at maximum output. With mixed use — low output for most of the day and short peaks during the coldest hours — real-world autonomy typically lands somewhere between those two figures. Households that are away during the day and heat mainly in the morning and evening will typically see the higher end of that estimate, since the stove spends fewer hours running at its top setting.

In practice, this means that under normal use — with the stove modulating output according to real heating needs — a single hopper load can comfortably cover a full day of heating, including overnight hours if the stove is programmed to drop to a lower setting while the home is empty or occupants are asleep. Topping up the hopper before bed or first thing in the morning is, for most users, the extent of the daily attention this side of the appliance requires. Keeping the hopper reasonably topped up, rather than routinely letting it run empty, also helps keep pellet feed consistent throughout each burn.

Installation and flue basics

The Duroflame Carré uses a rear flue outlet of 80 mm in diameter, a standard size for domestic pellet stoves that fits common flue pipe sections and venting kits used in residential installations. As with any combustion appliance, installation should be carried out by a qualified professional, who will assess the flue run, whether vertical or horizontal sections are needed, and compliance with local building regulations and thermal installation codes. It is also the installer's job to confirm the combustion air supply and the clearance to combustible materials, both of which depend on the specific property and cannot be generalised without seeing the site.

The stove's dimensions — 738 mm high, 588 mm wide, and 525 mm deep — make it straightforward to plan the available space before purchase, which is especially useful when replacing an older stove or fitting into an already-defined space, such as a fireplace recess or a wall with an existing air supply. We recommend always confirming clearance distances and the specific requirements of your property with an installer before finalising a purchase. Having these measurements in hand also speeds up an installation quote, since an installer can assess the flue run and available recess without needing an exploratory first visit. None of this replaces a proper site visit before installation, but it does mean the conversation with an installer can start from real numbers rather than guesswork.

Which homes it suits

With a heat output of 4.7 to 6.1 kW, the Duroflame Carré is designed as the primary stove for a small-to-medium space — a living room, an open-plan kitchen-lounge, or a compact apartment — rather than as a central heating system for a large house. Its narrow footprint makes it particularly well suited to flats and homes where available wall space is limited. It is not intended as the sole heat source for a multi-storey house or a home with widely separated rooms, but as the stove for a main living area where a household spends most of its time.

If your home is larger, or you need more output, our catalogue also includes the Duroflame Abel Pellet Stove, another model from the same brand with different specifications. For smaller spaces or a second home with occasional heating needs, the Petite 6 Pellet Stove may be worth considering. Comparing a few models before deciding helps match the stove's real output to the size and insulation of the room you actually want to heat. Our team can advise on which model in the Duroflame range best fits your situation before you place an order.

Pairing the Duroflame Carré with our own wood pellets

While Maderas Caamaño does not manufacture the Duroflame Carré, we do produce our own wood pellets for biomass heating at our sawmill in Berdoias, Vimianzo. For a customer buying this stove, being able to order pellets from the same supplier simplifies the whole process: one point of contact, one delivery, and the assurance of a fuel of known quality for an appliance whose real-world performance depends directly on pellet quality. There is no need to manage the pellet order and the stove order separately, or to coordinate two deliveries on different dates: both can leave our facility as part of the same shipment. This is particularly convenient for customers outside Spain, who would otherwise need to arrange fuel separately once the stove itself has arrived and been installed.

Pellet quality has a direct effect on how any stove performs in practice, on how much ash it produces, and on how often the burner pot needs cleaning. We recommend that customers buying the Duroflame Carré use consistently good-quality pellets from the very first firing, rather than waiting for combustion problems to appear before reconsidering their fuel supplier. Consistent pellets with a low fines content help the stove behave the same way from one load to the next, rather than varying depending on which bag is in use.

Why buy this stove through Maderas Caamaño

Maderas Caamaño is a family-run sawmill and timber/biomass wholesaler based in Berdoias, Vimianzo, in A Coruña, Galicia, exporting to several countries across Europe. Adding recognised pellet stove brands such as Duroflame to our catalogue is a natural extension of a business that already supplies the fuel these stoves burn: rather than sourcing pellets from one supplier and a stove from another, customers can resolve both needs through a single point of contact. This closeness between producing biomass fuel and supplying stoves is exactly what allows us to speak knowledgeably about both the fuel and the delivery logistics of the appliance. It also means our team can answer practical questions about pairing this specific stove with our pellets, rather than treating the two as unrelated product lines handled by different people.

We work with homeowners, installers, and procurement buyers who need the appliance and the pellets delivered together, and we can arrange shipping both within Spain and to other European countries where we already distribute timber and biomass, including Portugal, France, Germany, Italy, the Netherlands, Belgium, the United Kingdom, and Ireland. If you have questions about availability, lead times, or the current price of the Duroflame Carré, please contact us directly — that is the most reliable way to get up-to-date information, since these details can change.

Applications & uses

• Main living room in a compact flat or house
• Open-plan kitchen-lounge in a small single-family home
• Second home or holiday property in a mild climate
• Replacing an older pellet stove in an existing wall recess
• Existing Maderas Caamaño pellet customers upgrading their heating appliance
• Living spaces where a slim, upright design is preferred over a bulky stove
• Installations with a straightforward rear-flue run

Gallery

Frequently asked questions